Was going to have a bid on these BUT....................

[Davey J]

http://www.ebay.co.uk/itm/140725623116?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649#ht_500wt_1413

Is that not a pair of exhaust camshafts I'm looking at or am I going mad?!

Also, there is not a lot of duration on those lobes. My Piper 285 and even my QED 42Hs have a lot blunter looking profile but fatter, more bulbous lobe. They look like standard GM items from that photo but perhaps that's a bit harsh.

I've asked for a picture of the end stamps that QED put into them but not had a response....................

Any thoughts on them?

[Harvey]

Re: Was going to have a bid on these BUT....................

They will be for the later DIS pack C20XE varient as they don't run the extra cam length for the dizzy as it's blanked off.

Here's a pic of my SBD cams for the DIS pack C20XE as i don't run a dizzy with the MBE, you can see the extra bit for the dizzy isn't on the exhaust cam.

[Davey J]

Re: Was going to have a bid on these BUT....................

OK, the other thing that had me stumped is the lobes look to be in the exact same place on both cams (i.e positioned the same).....................

[Davey J]

Re: Was going to have a bid on these BUT....................

I'm looking at them totally the wrong way around! WAS going mad then!

DOH!

[DarrenH]

Re: Was going to have a bid on these BUT....................

is the distributor cam cap still blanked off harvey ? i think gary poole gave me journal section cut off an old cam??

[Harvey]

Re: Was going to have a bid on these BUT....................

is the distributor cam cap still blanked off harvey ? i think gary poole gave me journal section cut off an old cam??

Never had any need to remove it so I guess the answer is yes.