jamie_f
10-12-2004, 07:30 PM
well the time has come to break the cav so got cracking today, but got a bit carried awaylmao
the plan was to remove the ecu and loom, remove all the gubbins from the engine and have it ready to pull out in the morning, so i did that, and i was done by 10.30, so thought sod it and took the engine out, then thats all i was going to do so in the morning i could plonk the engine in the astra, but had the engine ot but 12, thought sod it and refitted it to the astra againlmao
so thats waht i did, here a few pics
einge with rad and fuel pipes disconnected, loom out all disconnected
http://homepage.ntlworld.com/jamie.fisher/enigeincav.jpg
bumper removed and being drained of fluids
http://homepage.ntlworld.com/jamie.fisher/enigeincav2.jpg
eninge and box out the top as always ;)
http://homepage.ntlworld.com/jamie.fisher/outthetop.jpg
empty cav engine bay
http://homepage.ntlworld.com/jamie.fisher/emptycav.jpg
random picture on the the engine on the crane
http://homepage.ntlworld.com/jamie.fisher/eningoncrane.jpg
difference between m2 astra and mk3 cav/astra mounts
http://homepage.ntlworld.com/jamie.fisher/mounts.jpg
eninge all mounted in place in the astra
http://homepage.ntlworld.com/jamie.fisher/engineinastra.jpg
engine went back in through the top and diddnt even touch the sides :cool:
http://homepage.ntlworld.com/jamie.fisher/noscrapes.jpg
this is how its left, ready to be finished tomorrow
http://homepage.ntlworld.com/jamie.fisher/eniginein.jpg
the plan was to remove the ecu and loom, remove all the gubbins from the engine and have it ready to pull out in the morning, so i did that, and i was done by 10.30, so thought sod it and took the engine out, then thats all i was going to do so in the morning i could plonk the engine in the astra, but had the engine ot but 12, thought sod it and refitted it to the astra againlmao
so thats waht i did, here a few pics
einge with rad and fuel pipes disconnected, loom out all disconnected
http://homepage.ntlworld.com/jamie.fisher/enigeincav.jpg
bumper removed and being drained of fluids
http://homepage.ntlworld.com/jamie.fisher/enigeincav2.jpg
eninge and box out the top as always ;)
http://homepage.ntlworld.com/jamie.fisher/outthetop.jpg
empty cav engine bay
http://homepage.ntlworld.com/jamie.fisher/emptycav.jpg
random picture on the the engine on the crane
http://homepage.ntlworld.com/jamie.fisher/eningoncrane.jpg
difference between m2 astra and mk3 cav/astra mounts
http://homepage.ntlworld.com/jamie.fisher/mounts.jpg
eninge all mounted in place in the astra
http://homepage.ntlworld.com/jamie.fisher/engineinastra.jpg
engine went back in through the top and diddnt even touch the sides :cool:
http://homepage.ntlworld.com/jamie.fisher/noscrapes.jpg
this is how its left, ready to be finished tomorrow
http://homepage.ntlworld.com/jamie.fisher/eniginein.jpg