Info sites?

[REMUS]

Hi, is there a vaux site that shows the power/weight of all models?

For exsample

Mk2 GTE 2.0 16v C20XE weight 950 kg

[Rob_S]

think odders has a data spreadsheet

[REMUS]

do you have it? chuck it my way if you do plz.

OT: Will alloys of a Renault Megane fit properly onto a mk2 or a calibra? I've been offered some 17"'s by a freind!

[Brett]

GTE 16v weights 1032Kg's for the late ABS/PAS models.

power to weight is calculated by dividing BHP by weight and timesing it by 1000.

Mine is in the 170bhp/tonne reigon.

[Allen Mead]

mines 210bhp/tonne :D :D :p

[_SBD16v]

mine is 225 - 240 depending on what my weight is

[REMUS]

nice, could you tell me if ET 35 alloys will fit my cali which is somthing like et 49

[_SBD16v]

i did not think calis where 49mm

[BazW]

et35's will fit you might get a bit of wobble around 50mph tho.my mate's selling some 17" oz alloys that where fitted to a cav gsi & that drove ok & the're et 35

[_SBD16v]

why would you get wobble at 50 mph you should not only if the wheels are out of balance the et is only the distance the inside face of the wheel is from the center of the wheel

[_SBD16v]

35mm would just mean the wheel would stick you of the car 14mm more

[Neil]

I had the pleasure of riding a 2004 Yamaha R1 this summer. 1000bhp/tonne.

That thing was flipping quick.

Sorry i forgot where i was for a minute.

http://img86.exs.cx/img86/6017/Thesideview02-08-04.jpg

[Gander]

Did you wheelie it all the way or is that what the front end looked like after you'd ridden it? :p

[REMUS]

why would you get wobble at 50 mph you should not only if the wheels are out of balance the et is only the distance the inside face of the wheel is from the center of the wheel

It has to do with the drive shaft set up, it causes tramlineing and wobble.