Point of entry

[michael tucker]

I am wondering which is the easiest way to feed wire from the engine bay through the bulk head to the dash. I dont want to use the speedo cable hole either.
Cheers

[richie00boy]

Re: Point of entry

If you don't mind going a less direct route, you can come by the large grommet on the passenger side scuttle panel. You can remove the black tape then open the grommet out to fit another wire in quite easily.

[Astra Dan]

Re: Point of entry

I noticed on mine there are two empty holes with grommets in, one quite large I assumed was the not needed speedo cable, another was quite small, up by the brake pedal I think.