Mark T, Ian T, Ronin....

[James C]

..... And me - all in Total Vauxhall.

Well done to Mr Star Car Mark - who is now on the 3000cc NA leader board. Ian just required a extra 3bhp (that'll be the ekotek valve then ) in order to get onto the 2500cc NA board.

Ronin was in at 6th narrowly behind some other LET's however I seem to remember that not all was 100% on the day.

I myself had an impressive run but not to any dizzying heights, and I was clear of the bottom quarter at 19th out of 26.

[Ronin]

Re: Mark T, Ian T, Ronin....

however I seem to remember that not all was 100% on the day.

Damn right! Was only holding 10psi on the day.... should see much more now it's holding 20! (again big thanks goes to Paul and Micky for the new turbo)

Check the ****ing awful pic people!

[micky taylor]

Re: Mark T, Ian T, Ronin....

i saw that stuff today, you done ok to get 163 james (you must have a good mechanic)

[Ronin]

Re: Mark T, Ian T, Ronin....

Doesn't say much for mine

[micky taylor]

Re: Mark T, Ian T, Ronin....

my manager was more excited than me seeing your car in the mag, he ran all the way out to tell me it was quite amusing mate

[Ronin]

Re: Mark T, Ian T, Ronin....

Does that mean I get free servicing for life?

[micky taylor]

Re: Mark T, Ian T, Ronin....

Does that mean I get free servicing for life?

ha ha ha ha ha ha ha, i almost fell of my chair then yes mate you can as long as YOU do it!!

[James C]

Re: Mark T, Ian T, Ronin....

i saw that stuff today, you done ok to get 163 james (you must have a good mechanic)

[Ian T]

Re: Mark T, Ian T, Ronin....

LMAO...

Nice to see a bit of Mk2 impact.

Mark's star car eh? I know they liked it a lot on the day, they were asking to be allowed to do a feature on it.

I've got some ideas for mine, namely working out how to change when the inlet plenum valves change over. Need to do a few RR runs using Mark's test loom first though, to work out when to flip em.

I could cheat and throw money at it (pay someone to remap it) but that'd be gay.

I'll be back.

Actually, saw a few other references to the forum in the mag as well, so it's all good this month.

Ian.

[Mark F]

Re: Mark T, Ian T, Ronin....

Well done all on the RR feature! I nearly choked on my breakfast when I turned the page and saw all the familar faces! There's also quite a few others I know in the same issue!

Look's like we also have an 8-valve turbo (Turbo Dan) in next month's issue!

[MK2-JOHN]

Re: Mark T, Ian T, Ronin....

Just read that article, shame kev Reads cossie mk2 wasnt finished in time to be there (he took a mk4 gsi instead)

good results lads,

(have you's seen who's astra is getting a full feature in next months T.V??)

[Ronin]

Re: Mark T, Ian T, Ronin....

I need to try and pick a copy up but WHSmiths is my only option and it's a slut to get to without parking up and walking,,, might bully the misses into getting me one from London.

[Dannyc]

Re: Mark T, Ian T, Ronin....

Good BHP there James. Your figures (the GTE's power output, not your physique!) is a credit to you.

Will buy the mag tomorrow.

[n1cossie]

Re: Mark T, Ian T, Ronin....

Does that mean I get free servicing for life?

micky loves to give free services.